Genwec Neo 800W Brushed Stainless Steel Hand Dryer
- Finished in Brushed Stainless Steel
- Total Power: 800W
- Dimensions (mm): H282mm x W190mm x D100mm
- Drying Time: 20 Seconds
Genwec Neo 800W Hand Dryer - Brushed Stainless Steel
The Genwec Neo Automatic Brushed Stainless Steel Hand Dryer is a sleek, compact, and high-efficiency solution tailored for modern washroom environments. Crafted for both performance and aesthetics, it features a durable brushed stainless steel cover secured with tamper-proof screws to a sturdy ABS base plate, which mounts to the wall at three points for a vandal-resistant, secure installation.
Inside, the unit houses a powerful high-pressure universal brush motor running at 28,000 RPM (220–240V, Class F), safeguarded by a thermal cut-out. It works in tandem with a dual-plate Nickel-Chromium (NiCr) heating element supported by mica and protected with dual thermal limiters. An advanced electronic control system ensures energy efficiency with a low standby consumption of less than 0.5W. Activation is completely touch-free, using a fully adjustable infrared sensor that detects hands within a 6–15 cm range. The dryer delivers a strong, even air stream that dries hands in just 20 seconds and includes an auto shut-off function after 30 seconds if a static object is detected in the sensor’s range, resetting automatically once cleared.
For added hygiene, the Neo dryer includes a HEPA H13 filter at the motor inlet, effectively removing 99.95% of airborne particles as small as 0.3 microns. Its slim design ensures ADA compliance, while its IP24 rating protects against water ingress. With an airspeed of 250 km/h and an output temperature of 48°C, it operates at a modest noise level of 75 dBA (measured at 2 metres) and draws just 3.48 amps at a total input power of 800W (split equally between the motor and heating element). Designed with modular maintenance in mind, the unit allows for easy replacement of key components, including the motor, heater, sensor, HEPA filter, and control board.
- Dimensions (mm): H282mm x W190mm x D100mm
- Drying Time: 20 Seconds
- Noise Level @ 2m: 75 dBA
- RPM: 28,000
- Total Power: 800W
- Heating Element Power: 400W
- Motor Power: 400W
- Disconnection Time: 30 Seconds
- Consumption: 3,48A
- Electrical Insulation: Class Ⅱ
- Voltage: 220-240V
- Frequency: 50-60Hz
- IP Rating: IP24
- Air Speed: 250km/h
- Air Temperature: 48℃
- GTIN/EAN: 8433989614661
| Product Code | GW01170401 |
| Dimensions (mm) | H282mm x W190mm x P100mm |
| Finish | Brushed Stainless Steel |
| Voltage | 220-240V |
| Frequency | 50-60Hz |
| Air Speed | 250km/h |
| Hepa Filter | Yes |
| Air Temperature | 48ºC |
| Total Power | 800W |
| Heating Element Power | 400W |
| Motor Power | 400W |
| Consumption | 3.48 A |
| Electrical Insulation | Class Ⅱ |
| IP Rating | IP24 |
| Drying Time | 20 Seconds |
| Noise Level @ 2m | 75 dBA |
| R/Min | 28,000 |
| Vandal Proof Disconnection | 30 Seconds |
| Weight | 3.75kg |
| GTIN/EAN | 8433989614661 |
What is the power rating of the Genwec Neo Brushed Stainless Steel Hand Dryer?
The Genwec Neo Hand Dryer has a power rating of 800 watts, making it energy-efficient while providing effective hand drying performance.
What is the noise level during operation?
The Genwec Neo Hand Dryer operates at a noise level of 75dBA, providing a relatively quiet drying experience compared to other hand dryers in its class.
Is the hand dryer equipped with an automatic sensor?
Yes, the Genwec Neo Hand Dryer features an infrared sensor that activates the dryer automatically when hands are placed beneath it, promoting hygiene by eliminating the need for physical contact.
What are the dimensions and weight of the unit?
The Genwec Neo Hand Dryer measures 190mm in width, 100mm in depth, and 282mm in height, with a weight of 3.75 kg, making it compact and suitable for various restroom sizes.
Our Delivery Charges and times are explained:
Delivery Charges
All deliveries have a standard charge of £9.50 + VAT up to 20kg. Where stated, certain products are delivered FREE of charge (mainland UK only*). Check the description of the desired product and if it says free delivery then you will not be charged for delivery*
Extra Charges
Where the weight is over 20kg we reserve the right to charge more dependent on product type and delivery postcode, our customer service team will be in touch and inform you of any extra charges before we despatch.
Delivery Times
All products will have a delivery time stated in their description. Next Working Day - these products will be delivered Next Working Day if ordered before 12.00, or in certain circumstances up until 4:00 pm. Please call if you require a Next Working Day and we will try our best to get it to you. Certain products will state within 48hrs, within 3 Days or within 5 days. These products will be delivered within the time stated. If you require delivery on a certain day please put this in the comments and we will aim to deliver on that day.
Certain products such as radiators are delivered after 5 working days, when purchasing a radiator please put in the desired delivery date which is 5 working days after ordering. In some cases, stock permitting, we can get radiators out sooner. Please call or put in the customer comments if you need something urgently and we will try our best.
Saturday Deliveries
We can arrange for a Saturday delivery for certain products, please call 01977 663331 for more details.
Please note: Although we will do our utmost to deliver your product in the time stated we cannot be held responsible for any unforeseen delays. Please do not book a plumber, electrician, etc until you have received the goods as we will not be held responsible for their time. Please read our terms and conditions for further details.
additional charges may be applicable dependent on your location please double-check with our customer service team



















